DRD Transfers - Class 60 - Triple grey (Sectorisation)

£4.49

Dry Rub Down transfers - Class 60 - Triple Grey/Sectorisation

Each pack includes:

  • Main cab side numbers

  • Front end numbers

  • Data panel

  • A spare set of transfers in case of any mistakes

Benefits:

  • No carrier film

  • Accurately reproduced from the prototype - not just generic spacing

  • The model does not require gloss coating prior to application.

Instructions:

  • Remove existing tempo printed numbers (we cannot accept any damage caused to a model locomotive whilst undertaking this process - it is undertaken entirely at the owner’s risk)

  • Align the transfer into the correct position and use a small amount of masking tape to hold in position

  • Apply the transfer using a soft pencil, rubbing over the entirety of the transfer a number of times to ensure it is applied correctly

  • If there are any issues with the application the number can be removed by rubbing water on a cotton bud over the surface. There is a spare set of numbers included in case of any mistakes.

This product has a recommended shelf life of 6 months. Any application post 6 months may not work as intended.

Number:
Quantity:
Add To Cart

Dry Rub Down transfers - Class 60 - Triple Grey/Sectorisation

Each pack includes:

  • Main cab side numbers

  • Front end numbers

  • Data panel

  • A spare set of transfers in case of any mistakes

Benefits:

  • No carrier film

  • Accurately reproduced from the prototype - not just generic spacing

  • The model does not require gloss coating prior to application.

Instructions:

  • Remove existing tempo printed numbers (we cannot accept any damage caused to a model locomotive whilst undertaking this process - it is undertaken entirely at the owner’s risk)

  • Align the transfer into the correct position and use a small amount of masking tape to hold in position

  • Apply the transfer using a soft pencil, rubbing over the entirety of the transfer a number of times to ensure it is applied correctly

  • If there are any issues with the application the number can be removed by rubbing water on a cotton bud over the surface. There is a spare set of numbers included in case of any mistakes.

This product has a recommended shelf life of 6 months. Any application post 6 months may not work as intended.

Dry Rub Down transfers - Class 60 - Triple Grey/Sectorisation

Each pack includes:

  • Main cab side numbers

  • Front end numbers

  • Data panel

  • A spare set of transfers in case of any mistakes

Benefits:

  • No carrier film

  • Accurately reproduced from the prototype - not just generic spacing

  • The model does not require gloss coating prior to application.

Instructions:

  • Remove existing tempo printed numbers (we cannot accept any damage caused to a model locomotive whilst undertaking this process - it is undertaken entirely at the owner’s risk)

  • Align the transfer into the correct position and use a small amount of masking tape to hold in position

  • Apply the transfer using a soft pencil, rubbing over the entirety of the transfer a number of times to ensure it is applied correctly

  • If there are any issues with the application the number can be removed by rubbing water on a cotton bud over the surface. There is a spare set of numbers included in case of any mistakes.

This product has a recommended shelf life of 6 months. Any application post 6 months may not work as intended.