BOGIE KIT 4MM – FREIGHTLINER MKI RIDE CONTROL BOGIE (RIGID) CC61B-1
The kit consists of:
1 x Etched sheet containing 2 etched frames.
4 x Pewter side frame castings.
Required: 4 x 10.5mm Ø appropriate (please see instructions) disc wheel-sets on 26mm pinpoint axles, 8 x 2mm shouldered pin point bearings to complete. Will make up 1 pair of bogies.
These bogies will fit directly onto the Bachmann wagons with the spacing washers provided on the etched sheet; there is no requirement to modify the wagon frame. The original Bachmann bogie pivot screws are used.
Please download the instructions from the link below
The kit consists of:
1 x Etched sheet containing 2 etched frames.
4 x Pewter side frame castings.
Required: 4 x 10.5mm Ø appropriate (please see instructions) disc wheel-sets on 26mm pinpoint axles, 8 x 2mm shouldered pin point bearings to complete. Will make up 1 pair of bogies.
These bogies will fit directly onto the Bachmann wagons with the spacing washers provided on the etched sheet; there is no requirement to modify the wagon frame. The original Bachmann bogie pivot screws are used.
Please download the instructions from the link below
The kit consists of:
1 x Etched sheet containing 2 etched frames.
4 x Pewter side frame castings.
Required: 4 x 10.5mm Ø appropriate (please see instructions) disc wheel-sets on 26mm pinpoint axles, 8 x 2mm shouldered pin point bearings to complete. Will make up 1 pair of bogies.
These bogies will fit directly onto the Bachmann wagons with the spacing washers provided on the etched sheet; there is no requirement to modify the wagon frame. The original Bachmann bogie pivot screws are used.
Please download the instructions from the link below