BOGIE KIT 4MM – FREIGHTLINER FL/1 BOGIE (RIGID) CC61B-FL

£7.99

The kit consists of:

1 x Etched sheet containing 2 etched frames.

4 x Pewter side frame castings.

Required: 4 x 10.5mm Ø appropriate (please see instructions) disc wheel-sets on 26mm pinpoint axles, 8 x 2mm shouldered pin point bearings to complete. Will make up 1 pair of bogies.

These bogies will fit directly onto the Bachmann wagons with the spacing washers provided on the etched sheet; there is no requirement to modify the wagon frame. The original Bachmann bogie pivot screws are used.

Please download the instructions from the link below

CC61B Ride Control Freightliner Rigid Bogies v2

Quantity:
Add To Cart

The kit consists of:

1 x Etched sheet containing 2 etched frames.

4 x Pewter side frame castings.

Required: 4 x 10.5mm Ø appropriate (please see instructions) disc wheel-sets on 26mm pinpoint axles, 8 x 2mm shouldered pin point bearings to complete. Will make up 1 pair of bogies.

These bogies will fit directly onto the Bachmann wagons with the spacing washers provided on the etched sheet; there is no requirement to modify the wagon frame. The original Bachmann bogie pivot screws are used.

Please download the instructions from the link below

CC61B Ride Control Freightliner Rigid Bogies v2

The kit consists of:

1 x Etched sheet containing 2 etched frames.

4 x Pewter side frame castings.

Required: 4 x 10.5mm Ø appropriate (please see instructions) disc wheel-sets on 26mm pinpoint axles, 8 x 2mm shouldered pin point bearings to complete. Will make up 1 pair of bogies.

These bogies will fit directly onto the Bachmann wagons with the spacing washers provided on the etched sheet; there is no requirement to modify the wagon frame. The original Bachmann bogie pivot screws are used.

Please download the instructions from the link below

CC61B Ride Control Freightliner Rigid Bogies v2

BOGIE 4MM – SCHLIEREN M25 2000MM WHEELBASE DISC BRAKED CC15B
£14.99
BOGIE 4MM – SAMBRE ET MEUSE Y27 1800MM WHEELBASE, SPRUNG CC11B
£15.99
sold out
BOGIE 4MM – SAMBRE ET MEUSE Y25 1800MM WHEELBASE SMALL SHOE BRAKED WITH TIMKEN BEARINGS, SPRUNG CC10B-ST
£15.99
BOGIE 4MM – SAMBRE ET MEUSE Y25 1800MM WHEELBASE DISC BRAKED WITH TIMKEN BEARINGS, SPRUNG CC10B-D
£15.99
BOGIE 4MM – SAMBRE ET MEUSE FABRICATED Y25 1800MM WHEELBASE SMALL SHOE BRAKE WITH SKF BEARINGS, SPRUNG CC10B-SK
£15.99